Generic Unit (Fixed Geometry) Installation Manual GN02
76 Ultrasonic Sensor Installation 6.1 Ultrasonic Sensor Serial Number Arrangement When installing the UC5 sensors, start with the smallest seria
86.2 Ultrasonic Sensor Mounting Guidelines The following guidelines will ensure optimal sensor performance and prevent sensor measurement error.
96.3 Low Profile Bracket Mounting Guidelines 1. Minimize the distance between the bolts to prevent bending the bracket and prevent the bracket f
106.4 Wing Sensor Installation 1. The sensor bracket should be oriented forward (ahead of the boom). 2. Typically the best mounting location fo
117 Module Installation An optional module mounting bracket kit is available for purchase from NORAC. The mounting brackets are compatible with
127.2 Control Module: Pull Type Sprayer 1. Refer to Figure 2 and Figure 10. 2. Securely mount the control module (E01) near the hitch of the sp
137.3 Input Module Cable C21 is shown in Figure 11 for informational purposes only. The interface cable is ordered separately from this kit and
148 Connecting the Sensors to the CANbus 1. Route cable C03 from the input module to the 3-way coupler (E10). 2. Fasten the 3-way coupler to th
159 Software Setup 1. Start up the sprayer and test the sprayer’s functionality. The display terminal does not need to be powered on for the o
1610 Cable Drawings 10.1 ITEM C01: 43220-10 - CABLE UC5 NETWORK 14 AWG - 10M 10.2 ITEM C03: 43220-01 - CABLE UC5 NETWORK 14 AWG - 1M
Printed in Canada Copyright 2009 by NORAC Systems International Inc. Reorder P/N: UC5-BC-GN02-INST Rev J (Generic Unit Fixed Geometry) NOTICE: NO
1710.3 ITEM C05: 43210-20 - CABLE UC5 NETWORK 18 AWG - 20M
Canada NORAC Systems International Inc. Phone: (+1) 306 664 6711 Toll Free: 1 800 667 3921 Shipping Address: 3702 Kinnear Place Saskatoon, SK S7P
Contents 1 Introduction ... 12
11 Introduction Congratulations on your purchase of the NORAC UC5 Spray Height Control System. This system is manufactured with top quality comp
22 Technical Specifications CAN ICES-3(A)/NMB-3(A) This device complies with part 15 of the FCC Rules. Operation is subject t
33 General UC5 System Layout Figure 1 and Figure 2 illustrate the general layout of the UC5 system components: Figure 1: General UC5 System Layo
44 Kit Parts The following diagrams illustrate the GN02 kit specific parts of the NORAC UC5 system. Interface cables (C21) and power cables (C30
54.2 List of Parts Item Part Number Name QuantityB05 44706-01 KIT CABLE TIE BLACK 10 PCS 21 IN 150 PCS 7.5 IN 1B20 44971 SENSOR MOUNTING BRACKET
65 Pre-Install Checklist The pre-install checklist is necessary to check the existing sprayer functionality before the installation. 1. Unfold
Kommentare zu diesen Handbüchern